Showing all 8 results

0.96 inch 128X64 OLED Display Module For Arduino

(0)
৳ 470.00 ৳ 550.00 - 15%

Interface: IIC/I2C GND: Power Gound VCC: 2.2V-5.5V SCL: CLK clock (High level 2.2V-5.5V) SDA: MOSI data (High level 2.2V-5.5V) Feature: Color: Blue LED Resolution: 128×64 Power: 0.06W Wide power supply range: DC 3V-5V Temperature: -30°C to 70°C Dimension: 29.28 x 27.1 mm (LW) Compatible with 3.3V and 5V control chip I / O level OLED … Continue reading 0.96 inch 128X64 OLED Display Module For Arduino

12V Acid Lead Batteries Indicator Battery Capacity

(0)
৳ 270.00

Features: With a shell, easy to use stand-alone or embedded in the panel on the product. Display Mode: Battery +Percentage Black wire connect negative electrode Red wire connect positive Usage: Connected the display panel positive and negative terminals to the tested battery positive and negative side, then the digital tube will show the battery level … Continue reading 12V Acid Lead Batteries Indicator Battery Capacity

4-Digit LED 0.56″ Display Tube Decimal 7 Segments TM1637 Clock Module

(0)
৳ 200.00

This is a basic, 4-digit 7-segment display module . The display features decimal points per digit. Module connecting to digital I/O on 2 pins. For Arduino use library: TM1637.h Package included: ​ 1*4-Digit LED 0.56″ 7 Segments Display Tube TM1637 Clock Double dots Module 0.56inch For Arduino

5V 650nm 5mW Laser Red Dot Module

(0)
৳ 45.00 ৳ 50.00 - 10%

Working life: more than 2000 hours Spot mode: dot facula, continuous output Laser wavelength: 650nm (Red) Copper Head Diameter is 6mm Light power: <5mW Supply Voltage: 4.5VDC Operating Current: <40mA Operating temperature: -36 ~ 65 Power lead length: 75mm Shell Material: Brass QTY:1 PCS  

DC-DC Step Down Power Supply Adjustable Module With LCD Display

(0)
৳ 399.00 ৳ 599.00 - 33%

Converter type: DC-DC Input voltage: 5-23V, please keep the margin, it is recommended to use within 20V. Output voltage: 0V-18V continuously adjustable, automatically save the last set voltage (the input voltage must be higher than the output voltage by more than 1V). Output current: Maximum 3A, it is recommended to use within 2A. If the … Continue reading DC-DC Step Down Power Supply Adjustable Module With LCD Display

IPS 1.3 inch 3.3V 12PIN SPI HD Full Color TFT Display 240*240

(0)
৳ 580.00

Size: 1.3 inch Active Area: 23.4*23.4 mm Module Size: 26.16*29.22 mm Resolution: 240*240 (Display direction can be adjusted, horizontal screen and vertical screen are OK) Drive IC: ST7789 Color: Full Color Viewing Direction: Full viewing angle Interface: 4-Wire SPI Interface PIN NO.: 12Pin Voltage: 3.3V Working Temp.: -20 ~ 70 degree

LCD1602 1602 module Blue screen 16×2 Character LCD Display Module

(0)
৳ 125.00 ৳ 190.00 - 34%

It is another great BLUE backlight LCD display. As the pin resources of for Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will be able to realize data display via … Continue reading LCD1602 1602 module Blue screen 16×2 Character LCD Display Module

MAX7219 Dot Matrix Module Microcontroller 4 In One Display

(0)
৳ 480.00 ৳ 550.00 - 13%

Note: A single module can drive a 8×8 dot matrix common cathode Operating Voltage: 5V A single module can drive a 8×8 dot matrix common cathode Operating Voltage: 5V Dimensions: 12.8X12.8X1.3cm/ Fixing screws with 64 holes with a diameter 3mm Module with input and output interfaces, support for cascading multiple modules Quality:1Set The left side … Continue reading MAX7219 Dot Matrix Module Microcontroller 4 In One Display

X
Change