Showing 1–12 of 107 results

0.28 Inch 2.5V-30V Mini Digital Voltmeter Voltage Tester Meter

(0)
৳ 120.00 ৳ 199.00 - 40%

Detection voltage: DC2.5V ~ 30V Working current: <30mA Display: 0.28 inch LED Dimensions: 31 × 12.0 × 9mm (length x width x height) Installation hole: 23 × 10 mm Measurement rate: ≥200mS / times Accuracy: 1% (+/- 1 word) Color: Red: 2.5V – 30V Yellow: 2.6V – 30V Green: 2.6V – 30V Blue: 3.2V – … Continue reading 0.28 Inch 2.5V-30V Mini Digital Voltmeter Voltage Tester Meter

0.91 Inch 128×32 I2C Blue OLED LCD Display DIY Oled Module SSD1306 Driver

(0)
৳ 500.00

Features: OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption. Driver IC: SSD1306 Size: 0.91 inch OLED Resolution: 128 x 32 IIC interface Display Color: Blue Pin Description: GND: Power Ground VCC: Power + (DC 3.3 ~5v) SCL: Clock Line SDA: Data Line Package Content: … Continue reading 0.91 Inch 128×32 I2C Blue OLED LCD Display DIY Oled Module SSD1306 Driver

0.9V-5V to 5V DC-DC Booster Module USB Mobile Step up Power Supply Module

(0)
৳ 38.00 ৳ 75.00 - 49%Hot

USB Mobile Step up Power Supply Module Input voltage: 0.9V-5V DC Transfer efficiency:96%(max) With USB port With working indicator light with one AA battery power supply output current can up to 200~300mA, two AA batteries to the output current of 500~600mA USB Mobile Step up Power Supply Module Specifications: USB Mobile Step up Power Supply Module Size:34 … Continue reading 0.9V-5V to 5V DC-DC Booster Module USB Mobile Step up Power Supply Module

12V Acid Lead Batteries Indicator Battery Capacity

(0)
৳ 270.00

Features: With a shell, easy to use stand-alone or embedded in the panel on the product. Display Mode: Battery +Percentage Black wire connect negative electrode Red wire connect positive Usage: Connected the display panel positive and negative terminals to the tested battery positive and negative side, then the digital tube will show the battery level … Continue reading 12V Acid Lead Batteries Indicator Battery Capacity

150W Boost Converter DC to DC 10-32V to 12-35V Step Up Voltage

(0)
৳ 400.00

Module Properties: non-isolated step-up module (BOOST) 65 * 56.5 * 23 (length * width * high) (mm) Input voltage :10-32V Output voltage: 12-35V (adjustable) Output Current: 6A (MAX) Input Current: 10A (MAX) (Please enhance heat dissipation if more than 10A) Output power: natural cooling 100W (MAX), enhance heat dissipation 150W (MAX) Easy to drive 65W … Continue reading 150W Boost Converter DC to DC 10-32V to 12-35V Step Up Voltage

1S 10A 3.7V li-ion BMS PCM battery protection board

(0)
৳ 80.00 ৳ 100.00 - 20%

Over charge voltage: 4.25±0.05V Over charge release voltage:4.23±0.05V Over discharge voltage:2.54±0.1V Maximal continuous charging/discharge current: 7.5A Maximal Discharging current: 10A Size: L35*W7*T2mm Weight: 10g

1S 15A li-ion BMS PCM battery protection board

(0)
৳ 92.00 ৳ 120.00 - 23%

Over charge voltage: 4.25±0.05V Over charge release voltage:4.23±0.05V Over discharge voltage:2.54±0.1V Maximal continuous charging/discharge current: 13A Maximal Discharging current: 15A Size: L35*W7*T2mm Weight: 10g

1S Lithium Battery Capacity Indicator

(0)
৳ 200.00

Description: 1.Battery type electricity quantity display 2.Wide application fields:lithium battery 3.Using Method:connect display board positive and negative port with tested battery positive and negative port,digital tube will display real-time battery electricity quantity 4.Digital Color:outline red,display block blue (when battery electricity quantity is full,it will be all on) Display Electricity Quantity Parameter: 1.When battery voltage is … Continue reading 1S Lithium Battery Capacity Indicator

3010 12V 2Pin 3CM 30mm 30x30x10mm 7 Blades DC Mini Brushless Cooling Fan

(0)
৳ 190.00 ৳ 200.00 - 5%

Easy installation,stable performance Plastic construction 7 blade fan High quality mini brushless DC fan, sleeve-bearing design cooling cooler Reducing equipment working environment temperature, prolong the service life of equipment        Specifics: Dimensions: 30x30x10mm Bearing Type: Sleeve  Rated Voltage: DC 12V Connector: PH2.0-2Pin Fan Blade: 7 Blades Rated Current: 0.08Amp±10% Rated Speed: 7000RPM±10% Air flow:3.45CFM±10% Noise: … Continue reading 3010 12V 2Pin 3CM 30mm 30x30x10mm 7 Blades DC Mini Brushless Cooling Fan

30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Shield module

(0)
৳ 600.00

 Stepper Motor Driver This is essentially a ramped up version of Ardumoto motor driver shield. For this monster shield we’ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We’ve also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The VIN and motor … Continue reading 30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Shield module

315Mhz Key Wireless Remote Control Kits Receiver module For arduino

(0)
৳ 300.00

Remote control  1.Operating voltage: DC12V (27A/12V battery x1) 2.Operating Current: 10mA @ 12V 3.Radiated power: 10mw @ 12V 4.Modulation mode: ASK (Amplitude Modulation) 5.Transmitting frequency: 315MHZ 6.Transmission distance :50-100M (Open field, the receiver sensitivity of -100dbm) 7.Encoder types: fixed code With decoding receiver board 1.The operating voltage DC5V, receiver sensitivity is-98db. Leg 7 bits, respectively, … Continue reading 315Mhz Key Wireless Remote Control Kits Receiver module For arduino

3DR 100mW Radio Telemetry Kit 915MHz (v2)

(0)
৳ 3,000.00

3DR Telemetry Kit Specifications – Very small size – Light weight (under 4 grams without antenna) – 915MHz MHz – Receiver sensitivity to -121 dBm – Transmit power up to 20dBm (100mW) – Transparent serial link – Air data rates up to 250kbps – MAVLink protocol framing and status reporting – Frequency hopping spread spectrum … Continue reading 3DR 100mW Radio Telemetry Kit 915MHz (v2)

X
Change